Altenew Educator - Level I Final Challenge

Hello everyone!  Today I am back with a more detailed tutorial of how I created today's card for my AECP Level I Class Final Project Assignment.  The three techniques I decided to use are Easy Die Cutting Techniques, All About Layering, and Let it Shine and although I'm pretty sure I had the Let it Shine part down pat already it is always great to see additional ideas and inspiration.

As you know if you're a regular visitor to my blog, I have been playing around a lot with alcohol inks and also regular Reinkers with 91% Rubbing Alcohol and Alcohol Blending Solution.  By this time I have many lovely backgrounds to use on cards and on most of them I have used my Minc to add foiling after they dry for that extra sparkle and shine that I love so much.  I had one that was particularly beautiful and large enough to make a 5 x 7 card, which I only do when making something for a special person or occasion such as a wedding or that type of thing.  This particular occasion is my daughter's 38th Birthday.

Sterling Silver Rose

Sterling Silver Rose

I started with a beautiful purple & rose alcohol inked blended background as my starting point for the flowers I wanted to put on it.  The Build-A-Flower Rose is an absolutely beautiful set that comes with dies and I love the finished product, but I needed more colors than I had in a single color family because there are 6 layers for the roses and 4 for the leaves, so I had to improvise.  Let it be said that a Misti or other stamp positioning tool is a must for this set.  I tried roses in several colors as I was initially planning to try to recreate Sterling Silver Roses which are a pale, kind of mauve-y purple and my daughter's favorite.  None of the colors seemed right and I even mixed in inks from other companies trying to achieve the look I was going for so I changed directions and went with a pink rose, which meant I also had to select a different background.  No problem, I had a favorite one in pink tones so I went ahead. 

I really wanted a more vibrant pink for my base color rather than Rose Quartz or Pink Diamond would have been for my pink roses, so I used Bubblegum Pink from Gina K Designs as my first layer on these roses.  The rest of the colors I used were all Altenew Crisp Ink colors from the Cherry Blossom and Rose Petals Mini Cube Collections.  Layer 2 was done in Pinkalicious, Layer 3 was done in Rubellite, Layer 4 in Razzleberry, and Layer 5 in Purple Wine.  This combination was exactly what I was looking for.  I did not stamp the 6th layer from this set.  It is very small and hard to see where it goes, so I didn't want to mess up all my work by putting it in the wrong place.

Now that I finally had the colors I was looking for I could stamp out the leaves in the Green Fields Collection of Crisp Inks Inks using Frayed Leaf for Layer 1, Forest Glades for Layer two and Evergreen for layers 3 and 4.  I stamped multiples of these so I could have some for the additional blooms I had stamped in an attempt to get a perfect match to the background.  I just tuck them into the stamp pocket for future use if I need to pull a card together quickly.

Now that I had all of my elements, it was time to decide what greeting to use and I also knew I wanted to use a frame for this card so I chose the Sweet Friend Stamp and Die Bundle which has a frame die with a coordinating stamp for it.  I took a piece of gold foiled cardstock and die cut the frame out of it.  I stamped the frame with the coordinating stamp using Versamark and Antique Gold Embossing Powder.  Now this does get a bit tricky because the foil wants to curl up so I ended up double stamping it to make sure I didn't have any gaps in the design.  To do this, you have to use the negative pieces as a placeholder and add a dot of adhesive on the back of each piece to hold it in place while you stamp.

At this point, things went horribly wrong!  As soon as I tried to die cut the frame out of the background, I realized I had forgotten one important thing. You cannot die cut the 144 lb. Yupo with any type of intricate die.  If it isn't a basic shape like a square or rectangle, there is no way. Not in any die cut machine - not even the Gemini Die Cutting Machine. The 74 lb Yupo cuts beautifully, but not so much with the heavy weight.  All it did was stretch out and warp my Yupo leaving it unusable.  I decided I needed to walk away for a little while but I also realized I would have to try to recreate the background in those same shades using the lighter weight Yupo or Glossy Cardstock.

The thing about alcohol inks for me, is that it's more "playtime" than actual work time because you will never get two backgrounds that look the same. I don't keep track of the colors I use because even using the same colors you will still get different looks. It's kind of like watercolor in that you can't make duplicates.  I didn't have a clue what colors I had used to get the background, but I was willing to play around for a while.  I finally had to shred the other background so it wouldn't sit there taunting me, ha ha.  It did go through my shredder with no problem - but not my Gemini or Cuttlebug.  After about an hour I came back to create a new background in similar colors.  It's not nearly as lovely as the other one, but it's the closest I could get.  I also ran this through my Minc Machine to get some of the gold veins although most of them are covered up with the other elements of the card.

My card is 6.75 inches by 4.75 inches and will fit perfectly into a 5 x 7 envelope.  I don't have one the right color, but I can definitely make one using my Scor-Pal.   To get  a card this size that is vertical in orientation, I cut two panels of the plum cardstock  - one at 7.25 inches by 4.75 and the other at 6.75 by 4.75.  I scored the longer piece at the ½ inch mark and folding it over, creased it well which leaves a little flap.   Then I put a piece of 1/4 inch score tape on that flap, then and adhered the front to the back.  I was very careful when doing this but you can trim away any uneven edges if needed. I had to cut about ⅛ inch from the back to have the front just a tiny bit longer.  I learned this nifty little trick from Yana Smakula.

I used a frame die from Spellbinders (due to the larger size card) to die cut the frame which also cuts a center panel in a rectangular shape.  I added little dots of Multi Medium Matte all around the frame working quickly, then set it carefully into place on my plum cardbase.  I lined it up with the card base creating the frame all the way around.

Slightly sideways view so you can see the inside the card with
the white panel and the embossed detail on the interior frame.  

Then I die cut the center piece from the marbled and foiled lightweight Yupo cardstock.  You can cut a rectangle from the heavyweight Yupo, but nothing with any detail at all.  Using a piece of fun foam, I added the center panel with Score tape on both sides of the fun foam to keep it in place.  I used the white negative piece from the additional frame I had cut from white cardstock to heat emboss my sentiment which came from the Build-A-Flower Sakura Blossom.  I inlaid that into the frame and taped it together on the back side with a bit of micro pore tape.  I like using this in this type of situation because it's very flat and doesn't add bulk.  I also added the positive white frame to the heat embossed foiled frame to make it a little bit sturdier.  Then I laid the blooms, leaves and the framed sentiment on the cardbase until I had a design that was pleasing to my eye.  I really struggle to do arrangements that are not from left to right.  It's the obvious choice for those of us who read English because we read from left to right.  So I challenged myself to do one that started on the right and went to the left.

Once I had my design, I used a piece of Press N Seal over the top and rubbing it into place, then picked up all of the elements and flipped it over so I could put adhesive on the back side.  Then I flipped it over again and carefully set it into place, rotating as needed before actually putting it on there.  Because the Press 'N Seal is semi-transparent, it's a great way to see the the layout to make sure you have it lined up the same.  Once you lay it down, press everything into place walk away for a few moments to let it set.  When you come back, gently pull the Press 'N Seal away from itself.  The top pieces will probably be loose, but you can hold them in place as you are peeling the film back, then add foam tape or adhesive under them and put them in place.  Fold the used piece of Press 'N Seal in half and save it for the next time around.  I use the same piece over and over until it loses it tackiness.

Anytime I use a darker cardstock, I die cut a panel of white cardstock to put on the interior of the card for my message or in case I want to add a greeting there.
The 2nd to largest die in the Spellbinders 5 x 7 Matting Basics A set is perfect for the inside of the card.

Once I got this card finished and nearly completed this post, I decided it needed a special touch since it is for my daughter after all.  She loves shiny and sparkly things also. A quick layer of Tonic Nuvo Shimmer Pen and a few gems did the trick. In case I haven't mentioned it before, I love to use Flat Backed Swarovski Crystals in the colors Crystal and Aurora Borealis in the 12 and 16 millimeter sizes.  I watch for a sale and buy a few packages at a time.  I don't use them for every card and it takes so few to make a big impact on a card. For the smaller size, there are 50 in a package and for the larger size there are 40 in a package.  A small package goes a long way.  If you did big crystals, they would just be gaudy and ugly, but these small ones give you a whole lot of bang for your buck.

I am late getting this card done but she asked me to make something that I haven't completed yet and I want to give it all to her at the same time.  So I better skedaddle off and clean up the rest of my "Craftermath" so I can finish that project as well.  Thank you so much for stopping by.  I've linked the supplies I've used below for your convenience (Affiliate Links used).

Altenew Antique Gold Crisp Embossing Powder Shop at: ALT	Altenew Build-A-Flower Sakura Blossom Shop at: SSS | ALT	Altenew Cherry Blossom Mini Cube Collection Shop at: ALT	Altenew Green Fields Mini Cube Collection Shop at: SSS | ALT
Altenew Green Fields Reinkers Shop at: ALT	Altenew Rose Petal Mini Cube Collection Shop at: ALT	Altenew Sweet Friend Bundle Shop at: SSS | ALT	Cuttlebug Die Cutting Machine Shop at: SSS
Gemini Full Size Die Cutting Machine Shop at: SSS	Heidi Swap Minc Machine Shop at: SSS	Kokuyo Long Dot Runner Adhesive Shop at: SSS	Marvy Jewel Picker Shop at: SSS
Mini MISTI Stamping Tool Shop at: SSS | ALT | GKD	MISTI Stamping Tool Shop at: SSS | ALT | GKD	Press 'N Seal Shop at: SSS	Ranger Multi Medium Matte Shop at: SSS
Scor-Pal Scoring Board Shop at: SSS	Scor-Tape 1/4th inch Shop at: PTI | SSS	Scotch 3M Foam Tape Shop at: SSS	Spellbinders Matting Basics 5 x 7 Set A Shop at: SSS | SPB
Spellbinders Renaissance Labels 52 Shop at: SPB	Teflon Bone Folder Shop at: SSS	Tonic 6 Inch Personal Trimmer Shop at: SSS	Tonic Aqua Shimmer Pen Shop at: SSS
Versamark Ink Shop at: SSS	Wagner Heat Tool Shop at: SSS

Altenew Educator - Irresistible Inking Techniques

I am happy to be here today with my last project for the Level 1 Classes of the Altenew Educator Certification Program.  Today's card features Irresistible Inking Techniques.  In this class we learned several different techniques for using our inks in less than traditional ways and there were a few I hadn't tried before.  So I chose to combine a couple of the techniques from the class with a twist of my own  for this project. 

I started with one of the Stamp Sets from Altenew's July 2018 Release, Beautiful Heart.  One of the techniques we learned was how to use ink with a brayer or an acrylic block for a soft background on our cards.  I had a brayer that I had never actually used and I loved the texture it added to my background panels.  You can smoosh some ink onto a craft mat, spray it with water (or in my case I used shimmer mist) and then run your brayer through it and then onto your cardstock panel.  For all of my panels and elements today, I used Bristol Cardstock because water moves so well on it.  This gives a kind of uneven texture to the ink so it looks like you've added a loose wash of watercolor.  I wanted to bring in both color families that I used, so I decided to create a background panel and a smaller panel done in this way.  I die cut both panels with Spellbinders Hemstitched Rectangles.

I tried several different colors before I settled on the backgrounds I had brayered with Frayed Leaf and Coral Bliss.

One of the other techniques in the class is one you've seen me use often - Heat Embossing using inks for watercolors.  I must say, this is still my preferred way to color images.  I love the translucent quality of the dye based inks and I'm not technically an artist, so it doesn't bother me that I'm not using watercolor.  However, I did a little change up here to the technique taught in the class and did a technique that I call Watercolor Detail Stamping.

I started by heat embossing the outline images using Antique Gold Embossing Powder.  For the larger area of the bloom, I used Pink Pearl Ink.  I inked up the image very well and then gave it a couple of spritzes of shimmer mist, then stamped it down into the outline of the image.  For the leaf I did the same thing using Frayed Leaf and Forest Glades for the one under the bloom.  For the 2nd layer of the bloom, I used Coral Bliss.  For the detail layer of the leaves I used Forest Glades on the light image and Evergreen on the darker leaves.  The little bit of moisture from the shimmer mists really softens and blends the edges together.  I try to use a light hand when I apply the water or mist to the blooms so that I am not getting drips and it's important to have a sprayer that produces a very fine mist.  I love the ones that come on the Tattered Angels Shimmer Mists and so I have one that is now labeled "Water" and another that is labeled "91% Rubbing Alcohol" that I use with Alcohol Inks sometimes.  Just find one that works the way you want it to and put a label on it.

This image is not quite as straight on, so you can really see the Gold Embossing on the images and the sentiment as well.  The sentiment I chose is one from Altenew Build-A-Flower Sakura Blossom.

Of course, I had to put an image in here for you where you can really see the reflection of the gold. 

Thanks so much for stopping by today!  I hope you enjoyed my little spin on this class.  As usual, I've linked the products I used below for your convenience.  Affiliate Links are used. 

Altenew Antique Gold Crisp Embossing Powder Shop at: ALT	Altenew Beautiful Heart Die Set Shop at: ALT	Altenew Beautiful Heart Stamp & Die Bundle Shop at: ALT	Altenew Beautiful Heart Stamp Set Shop at: ALT
Altenew Build-A-Flower Sakura Blossom Shop at: SSS | ALT	Altenew Green Fields Mini Cube Collection Shop at: SSS | ALT	Altenew Tea Party Mini Cube Collection Shop at: SSS | ALT	Canson Bristol Paper Shop at: SSS
Cuttlebug Die Cutting Machine Shop at: SSS	PTI Stamper's Select White Cardstock Shop at: PTI	Ranger Multi Medium Matte Shop at: SSS	Ranger Non-Stick Craft Sheet Shop at: SSS
Scotch 3M Foam Tape Shop at: SSS	Spellbinders Hemstitched Rectangle Dies Shop at: SSS | SPB	Versamark Ink Shop at: SSS	Wagner Heat Tool Shop at: SSS