Showing posts with label Alcohol Inks. Show all posts
Showing posts with label Alcohol Inks. Show all posts

Thursday, May 2, 2019

Creating New Colors Without buying New Inks

I promised last week that I would get working on this post for many of you who asked about how I created the colors I used for the Butterflies and Lady Bugs using the Petals & Wings Stamp Set from Gina K Designs.   I wanted colors that matched my patterned papers, but no one brand of inks had the colors I wanted so I did a bit of experimentation.

I received a package in the mail that included the card on the left from Karen Hightower.  While I realized where the butterflies came from, I hadn't used my set yet, so I hadn't realized there was a ladybug in the set.  My best friend loves ladybugs so after that,  I got my stamp set out to use it!

I had four sheets of this patterned paper in my stash from an older My Minds Eye paper pad that I knew would match the style of cards I was planning to make and that it was also a similar style to the design of the stamp set itself.   So I set about to play around with colors to see what I could do to make the colors a bit of a better match.

Because I wanted to stick with all Gina K Designs Inks as much as possible, I just pulled out my tray of Gina K Ink Cubes and started playing around a bit with color to see what I could do.  While these are not a perfect match, they are pretty dang close so I wanted to share with you what I did.

Here are some of the many Images I stamped to get just the right color for the cards I was planning to create.


If you have a basic understanding of how colors work, it's pretty easy to figure out what to use for your combinations.  All of the bodies were stamped with Black Amalgam Ink.  In order from left to right are the following:  Tranquil Teal, with no other color added.  Next, I used Bubble Gum Pink for the base layer with Passionate Pink added on top.  The third set is Cherry Red (my favorite Red) all by itself.  Next up comes Peach Bellini with 2 layers of innocent Innocent Pink on the top layer.  That gave me the kind of peach pink I was looking for.  The last set on the top row is Blue Lagoon with no additional color added.

For the second batch of Butterflies and Ladybugs, I used Dusty Rose with Bubblegum Pink on the top layer.  The next set was done using a base layer of Lovely Lavender with Innocent Pink for the Top Layer.  Next up, I stamped Wild Lilac with Passionate Pink for the Top Layer.  And they last two sets are both done in Turquoise Sea which is such a gorgeous color all by itself.  The softer colors were the ones I mixed two colors to achieve the ones I wanted a blended color for.


On this particular card, I used two layers of Peach Bellini with two layers of Innocent Pink.  I needed the slightly pinker version to go with the DSP, so I did double layers of each color to make it really pop off the background panel.  I used the Gina K Designs Elegant Oval die for the DSP.


I should also mention that is is the rare card that doesn't get some shimmer mist added to it somewhere.  That's the kind of "sparkly" areas that you can see on the images in all the photos.


I actually mailed one of these cards to Gloria (my BFF) before I photographed it but these cards were all along these same lines. You can see that the DSP I used was a great fit for the style of the butterflies and ladybugs.  Once I ran out of DSP, I grabbed some of my Alcohol Inked Backgrounds that I thought I might never use and went to town with them. Dies used for these backgrounds are the Elegant Oval, Heart Circle Die, Single and Double Stitched Circles which are all Gina K Designs.




For this card just above, I did a very light layer of Plum Punch with a heavier layer of Passionate Pink.  I used Plum Punch Cardstock as well as white and Gold Cardstock.  I saved a few of the little hearts from the Heart Circle Die to add to my greeting and then went over them with Crystalline Drops from Gina K Designs.  These work like Glossy Accents, but are much easier to control because of the dispenser.  The other card was one layer of Lovely Lavender with one layer of Innocent Pink.  I still have my MISTI set up to stamp more of these.


This card uses an alcohol inked background that I die cut using the Elegant Oval Die with Turquoise Sea ink.  I added a few Sequins with gems in the center for a pop of color.  It also so happens that I am a shimmer cardstock Junkie and this particular cardstock is called Peacock.  What a perfect color, huh?


I rarely buy DSP unless it is foiled but I do have the odd sheet or two of it in my stash.  I also really love the way this particular card came out.  These butterflies were stamped using tomato soup with two layers of Peach Bellini over it.  I used a scrap of soft aqua cardstock to cut the background panel because it tied into just the very few little aqua colored flowers in the paper.  I think those colors just pop off the paper together.  Again, a few sequins with gems in the center add a finishing touch.


And last but not least, a traditional colored Ladybug card done with Cherry Red Cardstock, Black Onyx, and some Creative Memories Gingham from many years ago for a fun card.  Once again, I used the Crystalline Drops for the hearts.  I also used Crystalline drops on many of the dots on the ladybugs in all of the cards.  It was a fast and easy way to add the dimension to the spots and more forgiving that Nuvo Drops although I did a few of the cards using them.  But the first time I messed one up, I switched to the Crystalline drops.


I was making these cards last week when we were expecting company on Saturday, so while I was cleaning off my desk and cleaning up the studio, I came across a few random things plus I put extras in my little dish on my desk.  While cleaning, I had to stop to pull one more card together for an upcoming birthday card.  The pink gingham, the white belly band, the black background panel and the two circles (one with a sentiment) were all in the pile on my desk along with the pink butterfly and ladybug, so it literally only took a few minutes to put this card together.  It's one of my favorites and I already have a young lady in mind that I'm planning to give it to.

The point of this post is this - if you don't have quite the right color of ink, play around with layering them until you get what you want.  For example, Mauve tones are pinks with a bit of purple in them.  So I used a lighter purple for the underneath color and added pink on top.  Just think about what undertones the color you want to use has in it and then add the secondary color.

I hope this information has been helpful to you all.  Stamps, Inks, and Dies are all Gina K. Designs and my affiliate link is here.  I appreciate it when you shop through my link as it supports my blog so I can continue to bring you content, techniques, and ideas.

Thanks so much for stopping by today.  I appreciate you very much!

Monday, March 25, 2019

March 2019 Keeping Christmas Blog Hop



Hello everyone!  It's the 25th of the month so that means it's time for the next edition of the Keeping Christmas Blog Hop!  Thanks for popping in today to see my projects.  I am super happy with the way these turned out even though when I first started this technique, I wasn't too sure it was going to turn into anything.  This particular group of cards was started by just playing with Alcohol Inks on an 11" x 14" sheet of Heavyweight Yupo.  I don't normally like the heavyweight because you can't die cut words out of it, but I have a sheet or two left still that I'm planning to make backgrounds out of as well.

This is going to be a long and very photo heavy post, but I got a lot of questions about the background when I posted this one on Instagram, so I want to be able to give you some of that information in this post.


To create this background was simply sitting with my Alcohol Inks and also my new Alcohol Pearls along with some of the Pinata Alcohol Ink in Brass and playing using a combination of Alcohol Blending Solution and Rubbing Alcohol.  I used 99% Alcohol for this project but it can be hard to find.  It also evaporates quickly giving you less time. The 91% is easier to find and doesn't evaporate quite as fast.  The 70% Rubbing Alcohol that I always have around for cleaning doesn't work too well as it evaporates much more slowly.  All told, I spent about two hours getting the large piece to look the way I wanted which was agate or marble with gold veins running through it. I love the end result but the larger sheets of Yupo can be a challenge.  I knew I wanted to use vivid pinks, purples, and reds for this piece so I pretty much restricted myself to those colors.

You can also do this technique and then run it through your laminator or Minc machine with Deco Foil, but the Brass Pinata ink is a far superior choice to the Mixitives that are part of the regular alcohol ink line of products.   I wanted that bright shiny gold to give it the more defined look of actual veins, so I chose that product rather than a mixative.  The Alcohol Ink Mixative's give more of a pearly color than the bright pop of gold and you can't really get the super defined look of veins without laminating it or rubbing deco foil on it while the ridges are still slightly tacky.

I used an Air Puffer from one of my previous cameras to move the ink around because I don't like to get too close to the fumes of the alcohol.  Plus, it puts out a bigger puff of air and I can lay it on my table to move the ink around.  Rather than bringing it up to my mouth level and not really being able to see where it's moving.  Mostly it's a whole lot of playing until you get a result you like.

I posted this image on Instagram and it was done on a sheet of glossy cardstock rather than Yupo.  Let's face it, Yupo Paper is expensive.  Therefore, I've had to try other materials for this method.

Here are some things to know about working with Alcohol Inks:

  • They are messy and they stain!  So I have trash bags over the back of my chair and the seat of my chair and I wear an apron or an older t-shirt.  My work Surface is glass, but I use a craft mat on top of that.  If you are working on a smaller panel, it's easier to contain some of the mess. 
  • When working with Alcohol Inks on Yupo, you can clean up a mistake by cleaning it with a bit of alcohol ink on a paper towel or rag.
  • When working with Glossy Cardstock, there is no going back.  You can add ink over the top, but you cannot wipe away a mistake. You can dab at it to remove some of the texture, and then put color over the top again, but you cannot wipe away the color like you can with Yupo.  In the beginning, I only used Yupo until I got a feel for how the inks moved and worked.  I recommend using Yupo in the beginning but cutting the sheets into card sized panels. I like to get the 9 x 12 and cut it into four panels which gives me four pieces of 4.5 x 6 inches so I have a little extra because I like to die cut all of my background panels for the crisp edge.  That size is also less intimidating.
  • Alcohol Inks, Blending Solution, and the Rubbing Alcohol will pretty much destroy the finish on the handles and discolor your ink blending tools when using the felt pads, so I have a couple that I use exclusively for this purpose. I'm usually trying to get more texture, so I don't often use the felt pads.  
  • Start with just a few colors and play around to see how many different looks you can get.  Once you get a feel for them and if you are happy with your results, then you can add more colors to your collection.
  • Last, but not least, playing with Alcohol Inks can be very addictive!  Don't say I didn't warn you!  *Ü*
The biggest thing to do is just sit and play with different techniques.  There are a ton of YouTube videos out there to watch if you want more information.  I've tried the straw method to blow the color around but it doesn't work that well in my particular case because I've had lung surgery so my left lung has diminished capacity.  The puffer works great for me.  It also keeps you from accidentally hyperventilating.  *Ü*  You can find one on Amazon.com. 

Now let's get on to the cards!  This was the first card I made and when I was die cutting the background panel, I didn't tape it down so it wasn't quite straight mean I had to recut it using a slightly small die in order to salvage it.  Then the Gold die cut panel is one size up from that as I like a narrow border most of the time.  That is the main difference in this card from the other five that are like it.  I die cut the Art Deco Tree from the inside of the gold background to save on my gold cardstock.  This first card was also assembled using Ranger Multi Medium Matte for the frame and tree.  Because it is a fine-lined die cut, for the rest of them I used my oldie but good, Xyron in the 2.5-inch width.  It was so much less of a headache than glue!  I pretty much always have the smaller little Xyron sitting on my desk but I don't use it often.  It this case, it was perfect to use for the interior tree in the frame. That frame is a single die from Poppy Stamps called Deco Tree Frame Craft Die and it cuts the frame and tree in one pass.  I love all things Art Deco because of the super clean lines and graphics. 


The Greeting is from a Papertrey Ink stamp set called A Thrill of Hope.  It's one of my favorites for Christmas Cards.  I die cut a Double Stitched Rectangle from My Favorite Things and then stamped with Versamark and Heat Embossed with Simon Says Stamp Antique Gold Embossing Powder being careful to use my Powder Tool (cornstarch these days due to the dangers of talc) on each one of these.  I used a negative as my placeholder in my mini MISTI.  This card has a white border around the edge while the others all have a gold border around the edge.  

These next few cards are all made using cut down panels from that original piece of Yupo, each unique in that each section is from a different part of the larger piece that I cut down for my card panels. 




If you'll look carefully, each of the backgrounds is slightly different since the background was not symmetrical in any way.  Once I started working on these, I had everything I need to make six cards, so I did all the die-cutting from the interior of the background panels for the trees, die cut both layers of the background panels and the stitched rectangles for them sentiment and then just assembled everything.

When I was finished, I had a scrap of the marbled piece big enough to put behind the framed tree die, so I grabbed a sheet of the Scarlet Shimmer Cardstock from Papertrey Ink, and die cut a scallop A2 Notecard from it.  The piece was about 4.25 x 2.75 inches tall so it was big enough to put behind the tree.  I still have a little square left so it's on my table for a possible future something on some other card.


And that, friends, is how I ended up with a 7th and slightly different looking card.  This last card is actually my husband's favorite.  That scrap of Yupo had the largest concentration of the deep red which is why I chose the Scarlet Shimmer Cardstock.


Here they all are together and they are simply gorgeous!  I topped each tree with a sparkling gem for the star on top of the tree.

There are several more stops on this hop today so be sure to stop by each of the blogs and leave some love in the comments section.

Vicki Finger (you are here)

We all work hard to bring beautiful projects to you each month in a wide variety of styles, so I hope you'll be sure to check out everyone's Blog Posts today.  

I know I haven't been blogging as much but my schedule has been absolutely crazy for the last 10 months.  I'm trying very hard to get back into my normal groove and I have a few deadlines for Blog Hops that I am participating in over the next 5 or 6 weeks.  I thank you very much for all of your visits, and notes of encouragement.  See you soon!

Affiliate Links Used Whenever Possible
Kokuyo Long Dot Runner Adhesive
Kokuyo Long Dot Runner Adhesive
Shop at:
SSS
Marvy Jewel Picker
Marvy Jewel Picker
Shop at:
SSS
Mini MISTI Stamping Tool
Mini MISTI Stamping Tool
Shop at:
SSS | ALT | GKD
PTI Scarlet Shimmer Cardstock
PTI Scarlet Shimmer Cardstock
Shop at:
PTI
PTI Stamper's Select White Cardstock
PTI Stamper's Select White Cardstock
Shop at:
PTI
Ranger Multi Medium Matte
Ranger Multi Medium Matte
Shop at:
SSS
Ranger Non-Stick Craft Sheet
Ranger Non-Stick Craft Sheet
Shop at:
SSS
SSS Antique Gold Embossing Powder
SSS Antique Gold Embossing Powder
Shop at:
SSS
SSS Stitched Rectangles Dies
SSS Stitched Rectangles Dies
Shop at:
SSS
Teflon Bone Folder
Teflon Bone Folder
Shop at:
SSS
Tim Holtz Ranger Alcohol Pearls - Set of 12
Tim Holtz Ranger Alcohol Pearls - Set of 12
Shop at:
SSS
Tim Holtz Tonic Paper Trimmer
Tim Holtz Tonic Paper Trimmer
Shop at:
SSS
Tim Holtz/Ranger Alcohol Ink Blending Solution
Tim Holtz/Ranger Alcohol Ink Blending Solution
Shop at:
SSS
Tim Holtz/Ranger Alcohol Inks
Tim Holtz/Ranger Alcohol Inks
Shop at:
SSS
Tonic 6 Inch Personal Trimmer
Tonic 6 Inch Personal Trimmer
Shop at:
SSS
Versamark Ink
Versamark Ink
Shop at:
SSS
Wagner Heat Tool
Wagner Heat Tool
Shop at:
SSS
WPLUS9 Gift Card Layers Designer Dies
WPLUS9 Gift Card Layers Designer Dies
Shop at:
SSS
Yupo Paper 74 lb.
Yupo Paper 74 lb.
Shop at:
SSS

Monday, August 27, 2018

Altenew Educator Certification Program - Easy Die Cutting Techniques

The last two weeks have been utterly crazy around my house.  Contractors are still coming in and out several times a week to do some of the upgrades we've been waiting on or for paint touch-ups and other things that were not finished in the house.  In between that, I drove over 400 miles last week just getting to doctor appointments as I get re-established with my doctors that I had before I moved away from this area 8.5 years ago.  Everybody wants their own labs, x-rays, etc. and it's a lot of running around since the doctors and their facilities for these tests are a minimum of 60 miles away and two of them are even farther at 75 and 80 miles away.  I try to book things back to back but it still takes a ton of time since everything is so far apart from each other, and I always have to allow drive time as well.  I am not scheduling anything for the next couple of weeks.

Anyhow, I wanted to continue on with my class work for the Altenew Educator Certification Program and this post is for "Easy Die Cutting Techniques" over at Altenew Academy.

We are getting a painting for our new home by an artist whose work I greatly admire and whose work I follow on Instagram. Her name is Karen Hall Nitz and she paints geodes. These are not just flat paintings, but are very three dimensional.  She lives in the Dallas area and I have been wanting one for quite a while now.  I am finally getting one.  I told her the colors and will leave the rest up to her.  In addition to that, I told her that I would make her a selection of cards as a little bonus.  She asked for "Thank You" cards.  I know I can always use lots of those.


In case you don't know what a geode is, you can look on Wikipedia to get a definition or explanation of how they are formed and then search for geode images on Google or Pinterest.

I happen to have an uncle in New Mexico who is a geologist and I have long had a fascination for geodes.  He gave my mom one at least 30 (Probably closer to 40) years ago.  On the surface, the rock just looks just plain and flat and pretty round, but when he broke it open, it has amethyst crystals inside, much like the one pictured here.

You can also search Pinterest for
Geodes and see the many varieties of crystals that form inside of the geodes like the one on the right. It's always fascinating to me to see the wide variety of colors and textures inside.

So when I first saw Karen's work, I became an instant fan! I've been following her for over a year now  and while I would love to have a smaller painting in the style of "Rose Quartz" that you can see in her gallery, I wanted something that goes with the house and will fill some space on a currently very empty wall.  We have very tall ceilings in our living room and it echoes pretty bad right now.  We are hoping the canvas will absorb some of the noise.  We really don't want to put blinds or curtains over the windows because we love all the light.

Geode Painting by © Karen Hall Nitz
I know this style of artwork wouldn't appeal to everyone, and honestly, it is difficult to capture in a photo, but it was love at first sight for me.  Let me also say, this is not our painting.  But I do love the sea blue colors with the silver and gold accents.  It's very similar to the colors we asked for but we said "heavy on the gold".  Our fixtures throughout the house are Brushed Nickel so we decided it needed to have at least some silver in there to tie it all together.  You have no idea how hard it was for me not to put gold or brass fixtures in this house given my love for gold.

If you've been following along on my blog, then you know that my grandson, Charlie, and I have been playing a whole bunch with Yupo Paper in Medium and Heavyweight Varieties along with glossy cardstock so I have a whole slew of backgrounds right now.  I have also been experimenting a lot with using my Minc to get "gold veins" onto the backgrounds as well.  I still haven't figured out exactly what makes it work, but because the backgrounds look like granite or some other type of stone, I think the style of them matches Karen's design aesthetic very well and so I chose to use the alcohol inked backgrounds to make all of Karen's cards. 



As I sat down this morning to figure out what I was going to do for my Easy Die Cutting Techniques project, I decided to do Die Cut Inlay so I used a particularly lovely background that Charlie had created to make a Thank You card for my personal stash.  It didn't turn out at all how he wanted it, so he gave it to me to use because, as you know, Pink is one of my favorite colors.  He likes the grunge effect and he also likes Red - all reds and variations of red including orange, pink and coral.  I knew it would be really pretty foiled and I was right.

As I mentioned in a few previous posts, there are lots of variables using the Yupo paper, but the biggest thing is that it's hard to die cut the #144 Yupo with an intricate die cut.  So I decided to do the next best thing.  I used a scrap from another background to die cut my word and a piece of gold foiled cardstock to cut the shadow or mat for the word.



Then I adhered the sentiment strip (both the white and gold layers) to the background panel, placed the shadow die onto that and ran it through my die cut machine, with a piece of printer paper over the top so it wouldn't leave marks in the foiling.  This did exactly what I thought it would which is that it cut through the top two layers leaving the heavyweight Yupo background panel completely intact while providing the recess for my inlay technique.  When you do this, be sure to save all the little white pieces that fall out of the die cut so you can put them in place once your die cut word is adhered to the card background.

I added a couple of views here for you so that you can see the gorgeous shine left by the Minc machine.  This is actually one of the classes I had taken early on at Altenew when I first started Cardmaking and it was taught by one of my favorite designers, Yana Smakula.  Yana has a way with Gold and she is probably the one person who most influenced my style.

This particular background used Flamingo Alcohol Ink with Gold Mixative with Alcohol Ink Blending Solution but there is just no way to predict how the foiling will come out of the Minc Machine and in fact, I don't have another background like it in the many that I've made now.   Simon Says Stamp has the entire collection of Alcohol Inks available as a group HERE or in individual colors at THIS link.

I hope you enjoyed reading my thought process of how all of these cards came to be.  I like for my blog posts to be more conversational rather than strictly technical in nature and I hope you enjoy that aspect as well.  Thank you so much for stopping by today to check out my project and post.  I really appreciate all of you who take time to comment or just visit.  I listed the supplies I've used below for your convenience (Affiliate Links may be used).

Cuttlebug Die Cutting Machine
Cuttlebug Die Cutting Machine
Shop at:
SSS
Heidi Swap Minc Machine
Heidi Swap Minc Machine
Shop at:
SSS
Kokuyo Long Dot Runner Adhesive
Kokuyo Long Dot Runner Adhesive
Shop at:
SSS
Ranger Multi Medium Matte
Ranger Multi Medium Matte
Shop at:
SSS
Ranger Non-Stick Craft Sheet
Ranger Non-Stick Craft Sheet
Shop at:
SSS
Thermoweb Decofoil Sheets - Gold Value Pack
Thermoweb Decofoil Sheets - Gold Value Pack
Shop at:
SSS | GKD
Tim Holtz Tonic Paper Trimmer
Tim Holtz Tonic Paper Trimmer
Shop at:
SSS
Tim Holtz/Ranger Alcohol Ink Blending Solution
Tim Holtz/Ranger Alcohol Ink Blending Solution
Shop at:
SSS
Tim Holtz/Ranger Alcohol Inks
Tim Holtz/Ranger Alcohol Inks
Shop at:
SSS
Tonic 6 Inch Personal Trimmer
Tonic 6 Inch Personal Trimmer
Shop at:
SSS
WPLUS9 Gift Card Layers Designer Dies
WPLUS9 Gift Card Layers Designer Dies
Shop at:
SSS
Yupo Heavyweight Paper 144 lb.
Yupo Heavyweight Paper 144 lb.
Shop at:
SSS
Yupo Paper 74 lb.
Yupo Paper 74 lb.
Shop at:
SSS