Monday, March 25, 2019

March 2019 Keeping Christmas Blog Hop



Hello everyone!  It's the 25th of the month so that means it's time for the next edition of the Keeping Christmas Blog Hop!  Thanks for popping in today to see my projects.  I am super happy with the way these turned out even though when I first started this technique, I wasn't too sure it was going to turn into anything.  This particular group of cards was started by just playing with Alcohol Inks on an 11" x 14" sheet of Heavyweight Yupo.  I don't normally like the heavyweight because you can't die cut words out of it, but I have a sheet or two left still that I'm planning to make backgrounds out of as well.

This is going to be a long and very photo heavy post, but I got a lot of questions about the background when I posted this one on Instagram, so I want to be able to give you some of that information in this post.


To create this background was simply sitting with my Alcohol Inks and also my new Alcohol Pearls along with some of the Pinata Alcohol Ink in Brass and playing using a combination of Alcohol Blending Solution and Rubbing Alcohol.  I used 99% Alcohol for this project but it can be hard to find.  It also evaporates quickly giving you less time. The 91% is easier to find and doesn't evaporate quite as fast.  The 70% Rubbing Alcohol that I always have around for cleaning doesn't work too well as it evaporates much more slowly.  All told, I spent about two hours getting the large piece to look the way I wanted which was agate or marble with gold veins running through it. I love the end result but the larger sheets of Yupo can be a challenge.  I knew I wanted to use vivid pinks, purples, and reds for this piece so I pretty much restricted myself to those colors.

You can also do this technique and then run it through your laminator or Minc machine with Deco Foil, but the Brass Pinata ink is a far superior choice to the Mixitives that are part of the regular alcohol ink line of products.   I wanted that bright shiny gold to give it the more defined look of actual veins, so I chose that product rather than a mixative.  The Alcohol Ink Mixative's give more of a pearly color than the bright pop of gold and you can't really get the super defined look of veins without laminating it or rubbing deco foil on it while the ridges are still slightly tacky.

I used an Air Puffer from one of my previous cameras to move the ink around because I don't like to get too close to the fumes of the alcohol.  Plus, it puts out a bigger puff of air and I can lay it on my table to move the ink around.  Rather than bringing it up to my mouth level and not really being able to see where it's moving.  Mostly it's a whole lot of playing until you get a result you like.

I posted this image on Instagram and it was done on a sheet of glossy cardstock rather than Yupo.  Let's face it, Yupo Paper is expensive.  Therefore, I've had to try other materials for this method.

Here are some things to know about working with Alcohol Inks:

  • They are messy and they stain!  So I have trash bags over the back of my chair and the seat of my chair and I wear an apron or an older t-shirt.  My work Surface is glass, but I use a craft mat on top of that.  If you are working on a smaller panel, it's easier to contain some of the mess. 
  • When working with Alcohol Inks on Yupo, you can clean up a mistake by cleaning it with a bit of alcohol ink on a paper towel or rag.
  • When working with Glossy Cardstock, there is no going back.  You can add ink over the top, but you cannot wipe away a mistake. You can dab at it to remove some of the texture, and then put color over the top again, but you cannot wipe away the color like you can with Yupo.  In the beginning, I only used Yupo until I got a feel for how the inks moved and worked.  I recommend using Yupo in the beginning but cutting the sheets into card sized panels. I like to get the 9 x 12 and cut it into four panels which gives me four pieces of 4.5 x 6 inches so I have a little extra because I like to die cut all of my background panels for the crisp edge.  That size is also less intimidating.
  • Alcohol Inks, Blending Solution, and the Rubbing Alcohol will pretty much destroy the finish on the handles and discolor your ink blending tools when using the felt pads, so I have a couple that I use exclusively for this purpose. I'm usually trying to get more texture, so I don't often use the felt pads.  
  • Start with just a few colors and play around to see how many different looks you can get.  Once you get a feel for them and if you are happy with your results, then you can add more colors to your collection.
  • Last, but not least, playing with Alcohol Inks can be very addictive!  Don't say I didn't warn you!  *Ü*
The biggest thing to do is just sit and play with different techniques.  There are a ton of YouTube videos out there to watch if you want more information.  I've tried the straw method to blow the color around but it doesn't work that well in my particular case because I've had lung surgery so my left lung has diminished capacity.  The puffer works great for me.  It also keeps you from accidentally hyperventilating.  *Ü*  You can find one on Amazon.com. 

Now let's get on to the cards!  This was the first card I made and when I was die cutting the background panel, I didn't tape it down so it wasn't quite straight mean I had to recut it using a slightly small die in order to salvage it.  Then the Gold die cut panel is one size up from that as I like a narrow border most of the time.  That is the main difference in this card from the other five that are like it.  I die cut the Art Deco Tree from the inside of the gold background to save on my gold cardstock.  This first card was also assembled using Ranger Multi Medium Matte for the frame and tree.  Because it is a fine-lined die cut, for the rest of them I used my oldie but good, Xyron in the 2.5-inch width.  It was so much less of a headache than glue!  I pretty much always have the smaller little Xyron sitting on my desk but I don't use it often.  It this case, it was perfect to use for the interior tree in the frame. That frame is a single die from Poppy Stamps called Deco Tree Frame Craft Die and it cuts the frame and tree in one pass.  I love all things Art Deco because of the super clean lines and graphics. 


The Greeting is from a Papertrey Ink stamp set called A Thrill of Hope.  It's one of my favorites for Christmas Cards.  I die cut a Double Stitched Rectangle from My Favorite Things and then stamped with Versamark and Heat Embossed with Simon Says Stamp Antique Gold Embossing Powder being careful to use my Powder Tool (cornstarch these days due to the dangers of talc) on each one of these.  I used a negative as my placeholder in my mini MISTI.  This card has a white border around the edge while the others all have a gold border around the edge.  

These next few cards are all made using cut down panels from that original piece of Yupo, each unique in that each section is from a different part of the larger piece that I cut down for my card panels. 




If you'll look carefully, each of the backgrounds is slightly different since the background was not symmetrical in any way.  Once I started working on these, I had everything I need to make six cards, so I did all the die-cutting from the interior of the background panels for the trees, die cut both layers of the background panels and the stitched rectangles for them sentiment and then just assembled everything.

When I was finished, I had a scrap of the marbled piece big enough to put behind the framed tree die, so I grabbed a sheet of the Scarlet Shimmer Cardstock from Papertrey Ink, and die cut a scallop A2 Notecard from it.  The piece was about 4.25 x 2.75 inches tall so it was big enough to put behind the tree.  I still have a little square left so it's on my table for a possible future something on some other card.


And that, friends, is how I ended up with a 7th and slightly different looking card.  This last card is actually my husband's favorite.  That scrap of Yupo had the largest concentration of the deep red which is why I chose the Scarlet Shimmer Cardstock.


Here they all are together and they are simply gorgeous!  I topped each tree with a sparkling gem for the star on top of the tree.

There are several more stops on this hop today so be sure to stop by each of the blogs and leave some love in the comments section.

Vicki Finger (you are here)

We all work hard to bring beautiful projects to you each month in a wide variety of styles, so I hope you'll be sure to check out everyone's Blog Posts today.  

I know I haven't been blogging as much but my schedule has been absolutely crazy for the last 10 months.  I'm trying very hard to get back into my normal groove and I have a few deadlines for Blog Hops that I am participating in over the next 5 or 6 weeks.  I thank you very much for all of your visits, and notes of encouragement.  See you soon!

Affiliate Links Used Whenever Possible
Kokuyo Long Dot Runner Adhesive
Kokuyo Long Dot Runner Adhesive
Shop at:
SSS
Marvy Jewel Picker
Marvy Jewel Picker
Shop at:
SSS
Mini MISTI Stamping Tool
Mini MISTI Stamping Tool
Shop at:
SSS | ALT | GKD
PTI Scarlet Shimmer Cardstock
PTI Scarlet Shimmer Cardstock
Shop at:
PTI
PTI Stamper's Select White Cardstock
PTI Stamper's Select White Cardstock
Shop at:
PTI
Ranger Multi Medium Matte
Ranger Multi Medium Matte
Shop at:
SSS
Ranger Non-Stick Craft Sheet
Ranger Non-Stick Craft Sheet
Shop at:
SSS
SSS Antique Gold Embossing Powder
SSS Antique Gold Embossing Powder
Shop at:
SSS
SSS Stitched Rectangles Dies
SSS Stitched Rectangles Dies
Shop at:
SSS
Teflon Bone Folder
Teflon Bone Folder
Shop at:
SSS
Tim Holtz Ranger Alcohol Pearls - Set of 12
Tim Holtz Ranger Alcohol Pearls - Set of 12
Shop at:
SSS
Tim Holtz Tonic Paper Trimmer
Tim Holtz Tonic Paper Trimmer
Shop at:
SSS
Tim Holtz/Ranger Alcohol Ink Blending Solution
Tim Holtz/Ranger Alcohol Ink Blending Solution
Shop at:
SSS
Tim Holtz/Ranger Alcohol Inks
Tim Holtz/Ranger Alcohol Inks
Shop at:
SSS
Tonic 6 Inch Personal Trimmer
Tonic 6 Inch Personal Trimmer
Shop at:
SSS
Versamark Ink
Versamark Ink
Shop at:
SSS
Wagner Heat Tool
Wagner Heat Tool
Shop at:
SSS
WPLUS9 Gift Card Layers Designer Dies
WPLUS9 Gift Card Layers Designer Dies
Shop at:
SSS
Yupo Paper 74 lb.
Yupo Paper 74 lb.
Shop at:
SSS

5 comments:

  1. Vicki, your cards are breathtaking, just gorgeous!

    ReplyDelete
  2. Beautiful, Vicki! You've made me want to get my alcohol inks out!

    ReplyDelete
  3. These are so beautiful...love your stunning backgrounds!

    ReplyDelete
  4. WOW, WOW, WOW, Vicki! LOVE! xx

    ReplyDelete
  5. This is such a gorgeous background, Vicki, and I love the card!

    ReplyDelete

Thank you so much for making my day by leaving an encouraging comment! It means the world to me when you do. Hugs!